Andrew - C asked ... Stannah 400?    |    Liam asked ... Belts for old WEBB Mower?    |    Leith asked ... Bosch Classix Type WKM41 front loader washing machine?    |    Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    Click here to ask your question

drain pump electric wires/connection?

In Samsung front loader washer model WD j1255c,iopened the drain filter and had to push it from behind as the cap did not pull out filter.For that I also had to unplug the drain pump but for got to remember which electric wire is to go in which pin of pump.There are 2 wires ,one grey colour and other white colour if someone could help by guiding which wire should go where least I end up exploding the pump.There are 2 pins ,one vertical and other horizontal or on pump one side is market with letter "N" and other side "L" if that could be any assistance.Any help is much appreciated
bulla, December 2014
It won't damage the pump if they are wrong way around. I have connected many that way & they still run. I think originally the blue wire went to L (live) and the grey was N (neutral) but not 100% sure.

Lincoln Appliance NZ, December 2014
link Click here to see other fixes for Samsung.