My washer has stopped spraying and there is no noise from the pump. After some reading I am guessing the fuse or similar has gone. I will try the fuse later.
However as they weren't working I presumed there was no water in and put a big jug of plain water in (no screenwash) with the intention of adding screenwash later. I then forgot but the water stopped spraying out. Now I am left witha tank full (almost to the brim) of plain water and I can't pour any screenwash in. Not sure what to do - especially in relation to the above and I can't just sit spraying it out to get it down. Do i need to drain it somehow

Kez, February 2015

check fuse, I would suggest it would be more awkward to remove your pump to drain your reservoir and would just pump it out,it will drop quite quickly,as the roads are very dirty just now with snow melt etc you will need the washers quite frequently and top up with neat screenwash as you see fit.

cdc, February 2015