andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

Pump block?

All my machine keeps saying is pump block. I clean out the trap on the front put it back together it went through the wash cycle and stopped. I cleaned out the trap again and tried the rinse and spin it rinsed then stopped. I took the back off and there was a broken wire I fixed it tries again and it still stops any suggestions or advice on my next step??
Justin W, August 2015
the trap is not the pump. its on the way to the pump ok. if you look at the bottom of the drum you will see a tube coming from it follow that tube, its first stop is the pump, the tube is clipped on to the pump.unclip it and see whats blocking it, all this work done with POWER AND WATER OFF, and the machine on its side,

h, August 2015