Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

Samsung dishwasher wont start, keeps flashing auto wash and normal wash?

Samsung dishwasher DW80F600 Series; when I push the power button, all the lights come on then go off, except the Smart Auto and the Normal, Those two lights keep flashing and ding several times, then nothing happens. lights keep flashing. I have tried resetting the dishwasher several times by turning off the power at the fuse box. But to no avail. Please tell me how I may fix this.
Thank you.
Vickie, September 2015
sounds like a bad ECS sensor. part#DD82-01118A

Lou, September 2015
It could be that the water inlet solenoid valve is defective - not unusual - and easy to change. OR

It could be the machine's control board.

Someone will need to decide which - the inlet valve is the easy and cheaper option - either you or an engineer.

More Luck..., September 2015
Thank you, but that is the problem, it wont start. It is stuck with those two lights flashing. It will not respond to any buttons.

vickie, September 2015
Nothing much happens in a dishwasher until some water gets in - then the water gets pumped around for a bit - then it gets heated etc.

When you open the door is there any water inside?

It could be that the water inlet solenoid valve is defective - not unusual - and easy to change.

There will be videos on YouTube

Good Luck..., September 2015
link Click here to see other fixes for Samsung.