GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

im needing help with my renault megane key / key reader?

Hi I'm needing help if anyone can.my Renault Megane won't start there's nothing amatter with the engine etc but everytime I put my key in the card reader it always comes up card not detected I've changed the battery's in the keys etc and its still coming up card not detected
charlene, January 2016
Hi there
I had nothing but problems with my key card, I sent my key off with a replacement case from eBay really cheap to this website.. www.keyrepair.co.uk
You send your key off recorded delivery they fix the circuits and place it in new casing and send it back all new and working the whole thing took 4 days and cost me £30 they were fantastic, hope this helps
Louise from cardiff

Louise, February 2016
Please be aware that Key CARDS require dealer attention!



CLIO II, KANGOO & MASTER INFRA RED RESYNCHRONISING

1. Turn Ignition OFF.

2. Press the central door locking buttonin the car for more than 5 seconds.

Note :the door should lock then unlock.

3. When this happens, 10 seconds is allowed for the rest of the procedure and the immobiliser warning light should illuminate – not flash, illuminate.

4. Point the 1st key at the receiver and press the button twice, the doors should then lock and unlock. Repeat this for other remotes as required.

5. Check that the remote control unlocks and locks the doors.

LAGUNA II & SAFRANE II INFRA RED RESYNCHRONISING

1. Turn Ignition OFF.

2. Press the central door locking button for more than 5 seconds.

Note : the door should lock then unlock.

3. When this happens, 15 seconds is allowed for the rest of the procedure and the immobiliser warning light should illuminate – not flash, illuminate.

4. Point the 1st key at the receiver and press the button once, the doors should lock and unlock.

5. Point the 2nd key (if programming a 2nd key) at the receiver and press the button once, the doors should lock and unlock.

6. Check that the remote control unlocks and locks the doors.

CLIO II, KANGOO & MASTER RF RESYNCHRONISING

1. Turn Ignition OFF.

2. Press the central door locking button for more than 5 seconds.

Note : the door should lock then unlock.

3. When this happens, 10 seconds is allowed for the rest of the procedure and the immobiliser warning light should illuminate – not flash, illuminate.

4. Press the remote control once, the doors should lock and unlock.

5. Repeat for second remote if required.

6. Check that the remote control unlocks and locks the doors.

LAGUNA II & SAFRANE II RF RESYNCHRONISING

1. Turn Ignition OFF.

2. Press the central door locking button for more than 5 seconds.

Note : the door should lock then unlock.

3. When this happens, 15 seconds is allowed for the rest of the procedure and the immobiliser warning light should illuminate – not flash, illuminate.

4. Press the remote control once, the doors should lock and unlock.

5. Press the 2nd remote control once (if programming a 2nd key), the doors should then lock and unlock.

6. Check that the remote control unlocks and locks the doors.

CLIO RE-SYNCHRONISING

1. Lock car manually

2. Unlock car manually

3. Insert key into ignition within 30 seconds.

4. Turn ignition and start vehicle.

MEGANE RF RESYNCHRONISING

Hold the remote control button down for longer than 10 seconds (until the red telltale light on the key extinguishes) then press it again 3 times.

Check that the doors lock and unlock correctly.

MEGANE WITH EARLY REMOTE (LED SWITCHES OFF WHEN HOLDING

BUTTON DEPRESSED)

1. Ignition ON

2. Press and hold the central locking button for 5 seconds

3. LED on the dash board will go off, come back on and begin to flash. The flashes correspond to the first digit of the 4 PIN security code - release the button when the first digit has been 'flashed' and then press the button again.

4. Wait for the second digit to be 'flashed' then release and re-press the button - continue until all digits have been entered.

5. If you have entered the code correctly the LED will then go out and the car can be started - to code the remote, switch off the ignition and press the central locking button again.

6. Press remote button 2 times within the immediate vicinity of the pick up (in the roof) On some vehicles you may need to switch the ignition back on to achieve this however.



xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

David, January 2016
link Click here to see other fixes for Renault.