3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

DW920 dish washer?

The door catch that holds the door closed has broken. I removed the piece and glued it back together. Now I cant screw it back on as the threads inside the two holes have disappeared. How can I get inside the frame to find what are possibly nuts. Any help please.
Ian Summersby, November 2016
The screws go in to a steel piece about 2 inches long. Don't know why F&P never fixed that piece so it couldn't move away. You have to now remove the outer cabinet by removing the screws at the back which hold it. Also remove the lower panel beneath the door and remove the screws at the front. Then all the screws around the front edge of cabinet hidden under the plastic trim. Gently lift the cabinet and move it back far enough to locate & reposition the steel piece. If I were you I would buy a new latch and not re use a glued one. They are cheap.

Lincoln Appliance NZ, November 2016
link Click here to see other fixes for Samsung DW920.