andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

I have a no start issue?

Hi I'm busy with a 2004 e46 320d, the previous guys changed the motor and now it does not start. I have run an ISS scan and the crank sensor was faulty. Replace the sensor and cleared out the fault code successfully. But after cranking the motor the sensor fault returns on my diagnostic meter. I have checked for fuses relays broken wires ect. As soon as i spray quickstart in the air intake then it wants to fire up but still fails to start. The starter motor also sounds a bit slow. Should I just try and tow the car till it starts or is there something I'm over looking?
Jason, January 2017
Hi,
The symptoms you describe are pointing to either a battery or earth problem. The engine earth will cause spurious faults if its bad, and will cause the slow cranking.
Try running separate earths to the engine and starter and see if it cranks faster.

Oldgrubber, January 2017
link Click here to see other fixes for BMW E46 320d.