Engine starts and runs without operating red safety lever. pulling lever slightly revs engine but release does not stop engine. Briggs Stratton S P 470

Dave, December 2019

Thanks for that Rupert . I,ve checked lever operates and appears to reach its stop position. I,ve lubricated it whilst cleaning etc and that is when problem started as it worked fine before I cleaned and lubricated. Lever seems to operate mechanism ok. Also starts now without operating handlebar lever.

Dave, December 2019

My answer is not specific to your exact model, but with most mowers, your problem will be something to do with the kill switch mechanism. Check the cable that runs from the handle bar to the engine is not kinked, rusted internally or getting caught somewhere. When pulled, it will acvitavate a lever on the engine and when released a spring on this lever will hold it in the engine kill position. Take a good look, lubricate and check spring is present and working. You could disconnect the cable at the lever end and activate by hand to see if this stops the engine.

Rupert, December 2019