Hi, I have a rover 214 R plate that would not start due flat-ish battery. I got a jump start of a mate and took the car for a run. I came home and stopped the engine. When i tried to start the car again there was nothing, the same nothing that you get when the immobiliser is armed. i have heard through various sources that the jump start could of confused the immobiliser. the flashing LED light in the dash still comes on and off as if the immobilser works and the doors also lock and unlock with the fob. I also do not have the four digit code to
reset the immobiliser.
i have a n reg rover 214 i took the battery off to charge put it back on the red led light stays lit and the car wont even turnover can i reset the immobiliser how
richard jones, January 2011
just tourch it my 214 sei is really ticking me off 2 i changed the battery today and the remote locking and the immobliser wil cnot work i need 2 sync it 2 the ECU but having no joy as off yet any advice plz write bk im desperate many thanks
barscrum, August 2008
if you turn the key to the second click and then hold then open (may be close button)button in for approx 30 seconds this should reset the immobiliser - worked on my M reg 216
lise, February 2007
A dealer with a dianostic computer can reset the car to recognise your plip (fob).
