Zanussi bearins replacement, black spots on washing?

Hi, could you please tell me in full how to replace the bearings on a Zanussi FJ1295 washing machine, black spots (grease or oil from bearings) seem to have appeared on our clothes, the holes match up to the drain holes on steel drum, also when machine is in spin it seems to be alot noiser than normal.I have put a wash on with no clothes in and found no noise and no black in drum, all this seems to indicate worn bearings. I cant afford to spend £350 plus on another machine and would like to repair this one. Zanussi service agents want about £200+ to repair it, I can get a bearing kit and new gasket for £38 so work out the maths yourself. Pleeeeease can someone help me.
Thank you in advance..........Bob
Bob, April 2004


done
The reason Zanussi is quoting you £200+ is that when these machines are dismantled, you will probably find the drum shaft badly worn and the insides of the plastic tub damaged. When the bearings are worn the drum drops inside the tub and cuts into the plastic like a cheese grater. If you just replace the bearings you might find you will have to strip the machine again to fit a new tub and drum. I have repaired dozens of these machines. I dont work for Zanussi.

SSEB, May 2004
link Click here to see other fixes for Zanussi.