GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

proline tdc6a producing no heat !?

i have a 4 year old proline tdc6a that seems to be working ok, but produces no heat ! i have replace the two thermostats on the back and also the heater, but it still does not heat up. any suggestions anyone ? i also bought a front thermostat but i could not see where this is meant to go.

cheers
paul douglas
paul douglas, January 2007
Followed your advice about finding the front thermostat after replacing the back green spotted one.After blowing the fluff off it the dryer started working fine without buying a new one. Ialso took the sides off and cleaned a tonne of fluff and grit out of the bottom

Allen Dawson, March 2007
i had another go today and stripped down the front of the dryer this time. i found a couple of wires that didn't seem to be going anywhere, they trailed down to the inner door section. inside there was the front thermostat so i replaced it and whipped everything back together again. i can confirm that it is now producing heat again and working correctly. the front thermostat is part number 1701575 and costs between £6-£9 on ebay. the job should take you about 45 mins and only slightly more tricky than replacing the rear thermostats.

I hope this helps someone.
Paul Douglas

Paul Douglas, January 2007
link Click here to see other fixes for Proline.