Andrew - C asked ... Stannah 400?    |    Liam asked ... Belts for old WEBB Mower?    |    Leith asked ... Bosch Classix Type WKM41 front loader washing machine?    |    Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    Click here to ask your question

Indesit WA155 floods?

When doing the rinse cycle it seems to fill more than 3/4 way up drum and then water comes out of the bottom of the dispenser drawer. Only occurs on rinse cycle. Rest of wash seems OK.
Mark Perry, February 2007
Hi can some one please help me as i have the same problem and i dont know where to start? would be great if someone could email me excatly what to do?

joshwinks69@hotmail.com

Many thanks

Josh

Josh M, July 2008
Thanks pe2e.
I already checked the pipe. It is clear. However, the fault has developed further. The timer constantly rotates and the leds flash constantly. I think the electronics have gone mad.

Mark Perry, February 2007
inside your machine is a fill level sensor, (switch with a pipe on it) they tend to get blocked up over time, follow the pipe down to the wider bit, this needs cleaning out. other reason for this fault is an inlet valve is not closing after filling, but first fault is more common

pe2e (ex appliance engineer), February 2007
link Click here to see other fixes for Indesit.