Hi
Can anybody help me to turn test off ? It just wont wash in this mode but keeps skipping to spin and wont let me select any other program and no mention in the manual how to turn test off? Thanks in advance.
Gary
machine was working fine until last week,then it will turn on run a test(as in pic) no error codes come up
but when you start programme it goes into test mode again!!!
sue, June 2012
My machine switches off mid cycle then comies back on
David, May 2012
why does it have this silly feature on it anyway its rediculous the amount of times ive had to do this is unbelivable
mandie, March 2011
i have the same problem.. the machine always on the test mode and keeps on spinning. i follow the same procedures and it works.. thank you..
i press and hold the start/cancel button then the system restarts and the screen displayed "on". then i press the on/off and the start/cancel button at the same time. the screen displayed "D:off" this means the test mode had turned off already.
thank you.. tumbs up for you guys..
ken, January 2011
h2o keeps coming up what does it mean
looby, November 2010
it does work. machine is not doing test anymore. Why hot point doesn't include this on manual?
cecilia, May 2010
Machine leaks at start of washing cycle , seems to be from the dispenser draw , have cleaned it out and seems to be no obvious blockage , rest of cycle runs ok ?
Steve H, April 2010
press the on off button and the start cancel button at the same time this should work
Jeannette, March 2010
Thank you! it worked, thought I was gonna have to get an engineer out!
Tracie, April 2009
Just had same with mine, turn machine off then back on, when on appears on the screen then press and hold start/cancel and on/off until doff appears on screen. machine will then work
woolley, July 2008
We have just had the same problem with test appearing and have followed the instructions above by holding down the start/cancel and the on/off buttons at the same time. It works!!!! Washing machine back to normal
Julia, July 2008
I have followed your instructions on the "Stop the TEST" by holding down the START CANCEL Button. The Test did not work! any more ideas?
pavla, July 2007
Hello, we have message on our washing mashine Wf F -05. What can we do???Thanks
pavla, July 2007
Well, for an WF865 you could try this:
Stop the TEST by holding down the START CANCEL Button. Test should disappear off the display)
Then hold down START CANCEL & ON OFF Buttons at the same time for a few seconds. The message D:Off should appear in the display. That might work it.
Andy.
www.hotpoint-wf840.utvinternet.com/
Andy, September 2005
sounds like you might have to book a service engineer .
contact hotpoint at www.hotpoint.co.uk
