GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Leaking fuel rail?

I have a 1995 dodge caran van with a 3.3 engine
It has a fuel leak on the injector fuel rail on drivers side at the line connectors .......is there a Oring there that can be replaced or >????????????
Thanks Geo
Geo, March 2007
Hey...back again.
The saga continues. I got ahold of Dodge, the took my info, but said my year is not included, The dodge dealer said...get this, $340.00 for a new fuel rail. I found a discount part supplier online, price $255.00 plus. These people are out of their minds !! I took the fuel rail off the engine, hmmm, that was fun.. i gave it a good wire brushing, turns out the thing is aluminum. It also "appears" that the leaking ends were soldered/welded on. I am debating soldering the crossover tube in place solid. i am not sure if taking the play out of the fuel tube system will come back to haunt me when i reassemble the tube and injectors back on the engine. Another thought is to de-solder the ends and see if i can replace the seals. Another thought, is to desolder the ends and replace threm with a fitting that has a 3/8 barb, and connect with 3/8(180 psi) injector hose and some clamps. The plot thickens...

bruce C, April 2007
Hi, I have a 1991 Grand Caravan with a 3.3. I to have the leaking seals on the fuel rail, i am glad i did not burn the thing up. The leak is so bad it had gas steaming of the manifiold, man I was lucky to smell it before it went up into flames... I have been searching, but have not found a "fuel rail seal recall' for this item. I would love to find it before I call the dealer again. It was already in for the abs recall. just curious, how much pressure goes through this line? if it is not more than 40 pounds or so, ya think it would be possible to cut off the ends and put on some pressure hose and a couple clamps? or, is this a tap session? Thanks, brucechynoweth@yahoo.com

bruce chynoweth, April 2007
Hey MArk thanks but I haven`t heard of any recall on the fuel rail .....do yoy have a recall number >?
Thanks ...I know about recalls I was with GM for 24 years he he

bg, March 2007
Have you had the factory recall work done on the fuel rail seals yet? If not, the dealership may fix the leak when installing the new seals....

Mark, March 2007
link Click here to see other fixes for Dodge.