i need to find a way to change the spark plugs with the plugs located in the back of the engine. i hear i need to unmount the motor and life the car....whats the right way.

tyler, March 2007

you do need to remove the motor mount bolts but only the dogbone bolts you can see on the top front of the motor. There are two of them.
Remove both bolts and with the transmission in nuetral(make sure the parking brake is on) use the tire tool or long wrench and insert it into the small ring located on top of the motor part the mount on the top of the right side mount and pull the engine forward, while pulling forward insert one of the bolts through the engine side of the mount(not the dogbone itself) then put it through the small hole in the bottom side of the dogbone.(this should be on the right side mount). I know it sound difficult but it's really not that bad. Just remember to have the car in nuetral or the motor will not roll forward.

Scorpion, April 2007