I have serviced my mower replacing air filter, spark plug and oil and I have been unable to start it.
It is difficult to find what are the settings for the machine.
I have tried several things and I am still unable to start the mower. Including cleaning the spades inside the pull cord cover area but are unsure what the settings would be incase they have slipped.
Could you give me any information for the settings for the mower or any other advice you could give me. This is the first time I have had the mower out this season.
Product No 9644261-51
Serial No 21900652
4.0HP

E-Mail address iviecallison@btinternet.com

Kind Regards


Mr Ivie Callison

IVIE CALLISON, April 2007

The petrol within the carburetter may have left waxy deposits like Vaseline that have blocked the jets. Disassemble the carburetter and clean it thoroughly.

Brillo, October 2013

check spark plug gap should be 25 th

mick s, June 2012

Empty out all old petrol and fill with fressh unleaded petrol

Jeff, March 2011

where is the spinner placed about?

michael a, August 2009

the self starter on my flymo 453 just make a burrring sound when i turn the key ???

michael a, August 2009

Wire brush the magnet area on the spinner so that the pulse sensor is able to detect a clear signal - it will thin give a good strong spark and fire up

Colin West, June 2007