How many turns out from seat for the mixture adjustments ( high and low adjustment screws?

Dennis Palmer, April 2007

How about just the idle screw, where should it be set

randy, February 2012

Run high side screw in to stop and back off one turn.
Do the same with low side but back out one and a half. Adjust with low side till it cranks.
Once its starts, hold saw wide open and turn high side Counter clockwise till the saw alternates between a high and low vibrato.
Turn the low side in at idle till the saw starts to idle up and stop. This should get you going.

Johnny in Texas, April 2007