Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Suzie asked ... Stuck Feed dog?    |    Click here to ask your question

Maytag PYE2300AYW - Won't Run?

Ran earlier today, but will not start now.

Checked Thermal Fuse with OHM meter, good.
Checked Momentary Switch on Timer with Meter - Good
Timer runs, motor not running.

There is a NON-RESETTABLE fuse.....somewhere according to the Electrical Schematic, but not sure where it is. Any suggestions as to next step to look at. Motor turns free....Dryer wheel turns free. Also....Door switch works, per OHM meter.

Suggestions appreciated.

Les.....
Les Keith, May 2007
Thank you Les for doing a follow up to this question! Your response really helped me out!

Shayna Berry, March 2008
Found the answer. There is a Thermal Fuse UNDER the heating coil. It had failed. Bought kit for $35, it was not too difficult to replace (just be careful and don't drop the screws). Runs like new.....(as I was trouble shooting, cleaned out all lint in base and exhaust...not much, but some.).

Les Keith, May 2007
link Click here to see other fixes for Maytag.