I have a older snapper rider mower in parts, need to know where all the wires go to make it run and stay charged;wiring diagrams red blue black yellow brown white? all good parts just need them back together thanks
The snapper with kohler engine I found myself working on had a bad needle and seat in the carb which allowed the carb to drain gas into the cylinder and hydrolock the engine. seat was not replaceable so ended up with a new carb for $145 if thats the case with yours be sure to change the oil and filter because the oil gets diluted by the gas standing in the cylinder and leaking past the rings.
carsnsuch, April 2013
The engine is seized
Sam, February 2013
i have an older snapper electric start mower..when i turn key all i get is clicking noise..battery is fine spark plug is new and it has gas..but strangely the cord to engine to pull start it wont come out either,,watsup?
joe, April 2010
http://public.snapper.com/Manuals/
Next to model # find yours on the rear of the mower. Under manual type click parts and then find the wiring diagram.
bret, February 2006
get a multimeter to check which is the charging system
