2 hours ago Dot asked ... Russell hobbs?    |    Jon asked ... How do I remove the flywheel. Mountfield 1640h ride on mower?    |    Keith Mumby asked ... Fordson starter solenoid?    |    Suzanne asked ... Washing programme stops after 3 minutes?    |    Rif asked ... Kenwood Dishwasher KID60S20 leaking from front?    |    Click here to ask your question

Opitma XM6 Alarm System?

Hi, i have a Opitma XM6 alarm. It sets ok but while i am out the alarm is activated. Zone 3. Nothing visual to say why the alarm has gone off. What could it be?
Jonathan Tuckwell, May 2007
Check which sensor is in zone 3 if a PIR sensor remove cover and look for insects blow clean with air duster and replace cover also if you have the manual try the walk test in maintenance option . Hope that helps

Bitez, June 2007
How is the zone protected, is it with an infra red motion detector? If so, make sure the sun doesn't shine on it as that can trigger it... look for reflections as well as direct sun !
Maybe you just have some loose connections in the sensor,check all 6 wires are secure.

Pete, May 2007
link Click here to see other fixes for XM6.