Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

MAC 3516 help! - pulled wrong hose?

In trying to fish out the fuel filter from inside the tank, I pulled on the wrong hose. It's evidently the fuel line to the carb, since it squirts when I push the priming bulb. Using my finger and a wire I can't seem to feel or detect any nipple in the tank to put the hose back on to. Any idea where in the tank it is? I might be able to put the hose back on with a pair of foreceps if I knew where. Do I have to disassemble the saw?
Help?
danzee, May 2007
there are two fule hose that go into the fuel tank. The one with the filter goes to the carburator. The second hose doesn't have a filter and goes to the primer bulb. To get to them you'll need to take off the side with the primer bulb. Hope it helps, just finished replacing all my worn out and decaying hoses with the help of my brother all due to a cracked chain oil reservoir that we replaced.

TPM, July 2007