Not being funny but if you are niot sure how to do this i would ask someone else...if you do it wrong you will have no brakes!!!!...although quite an easy job....remove the top bolt on the braske caliper and loosent the bottom one it should slide forward if not take both out and the caliper will come off....remove the pins that hold in the pads then the pads...fitting is reversal of this...if you are not sure ...jack up the car..and place axle stands both sides...reomve both wheels but do one side at a time you can then refer to the other side to renmind you of how it goes together
andi, June 2007
