Melodie asked ... How do I remove and change the basket? Duratech Identity Gu?    |    Kathy asked ... Samsung ER-4915?    |    Mark asked ... Oven door removal?    |    Jt asked ... Where to buy mt270x petrol cap?    |    Jo asked ... How to engage clutch on old sewing machine to engage needle?    |    Click here to ask your question

Ariston AVXF 120 is showing a Fault - F-03?

My machine is flashing a Fault F-03 but there is no indication in the hand book what the fault is.
Linda Elliott, June 2007
F03 Temp probe o/c or s/c
HES GIVEN YOU THE WRONG CODES

phil grimshaw, June 2007
a01=leak/overfilling
a02open/short ellement
inlet temp 2 high
half load selected but full load detected
a03open/short ntc
a04unable 2 sense temp rise within 70 mins
a05pressure switch check 4 blockages
a06=h20
a07 open circuit mtr
a08as above
a09as above
a10fill valve
a11valv motor module??
a12o/c heater
a13o/c s/s dispensor triac
a14syphoning out drain hose 2 low

airkool@hotmail.co.uk, June 2007
link Click here to see other fixes for Ariston AVXF 120.