andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

torque settings.renault 19 GTSX?

the head gasket has blown which has now been fixed but we now need the torque settings for a renault 19 1390 cc model GTSX 1991
kerry simmons, June 2007
kerry torque settings are as follows
1991 renault 19 1390 cc webber carb model
NEW BOLTS NEEDED tighten in the following stages
bolt-number lay-out as follows

8 4 1 5 9
belt end < >box end
7 3 2 6 10

you will need atorque wrench (numbered) and a torque wrench
with angles,
1) 20 nm
2) 100 degrees
3) WAIT 3 minutes
4) slacken bolts 1 and 2 then re-tighten to 20 nm then 100 degrees
5)carry out stage 4 for bolts 3-4-5 and 6 then 7-8-9 and 10
6) sorted

mike, June 2007
link Click here to see other fixes for Renault GTSX.