narnia asked ... Matsui ct-111ss?    |    Jason asked ... How to fix handset problems ( intercom ) and access control?    |    andy asked ... Samsung VP-D60 camcorder?    |    Shopper asked ... Poor Renault Radio Reception?    |    reg bardle asked ... Lg 7kg dd?    |    Click here to ask your question

mondeo 18 cc m reg?

car keeps cutting out occassionally when slowing down put new T piece in,and replaced idle speed control valve still the same only doe's it when engine starts to warm up any ideas would be much appreciated
kingpike26001703@aol.com, June 2007
This sounds like the Crankcase Breather Valve is getting blocked, When this is the case, the engine will stall when warm but not when cold. Its located in the PCV housing above the exhaust manifold on the front of the engine block
To remove it for cleaning, remove the exhaust heat guard and the rubber T piece under the coil. Reach under the Thermostat housing and you will find a small bolt holding the metal pipe on. Remove this. Now reach your hand in under the pulse air piping and give the rubber tube a good pull (Pliers help) and the valve should pull out. Clean it thoroughly with WD40 or the like and replace.

Steve J, August 2007
link Click here to see other fixes for Mondeo.