home Fix label Heating label_important Home Heating Systems category Worcester

worcester heat slave 9.24 combi boiler will not stay lit?

my worcester boiler will not stay lit when i light it with the igniter it lights up for a few minutes then goes off again so i have no heating or hot water can anyone help please

keith, June 2007

home Fix label Heating label_important Home Heating Systems category Worcesterdone

i got a worcester heatslave 9.24 and the timer is making a lot of noise. can i change it for a digital timer

tony, March 2013

Hi i have the same problem and i need a knew circit board very hard to get hold of

chez, December 2009

water comes on but heating kicks out after a few seconds ive removed the cover cleaned inside there was carbon and flies which i've removed. still have the same problem heating comes on for 3 secs then cuts out.....any answers will be appreaciated...

ANDY B, January 2009

I agree with Tony. The carbob build up on the flame shaper can stop a direct flame to the thermal sensor and that causes the gas to cut out. Cleaning the guide should help.

Bob, January 2008

mine did the same.i took the front off the boiler and then dissasembled the silver part where the flames are ignited.i found a high build-up of carbon and cleaned everything with a soft wire brush.this cured my problem.

tony, November 2007

link Click here to see other fixes for Worcester.