home Fix label Garden Tools label_important Grass Trimmers category Ryobi

How to Remove Clutch Rotor Assembly Ryobi 780r?

Hi: I left the trimmer outside and the recoil pully assembly has rusted to the point that it will not retract. I need to remove the clutch rotor assembly to get to it. Can someone tell me how to remove that specific part?

Joe, July 2007

home Fix label Garden Tools label_important Grass Trimmers category Ryobidone

clutch is screwed on, use a screwdriver stick it inside housing, becareful fins will break. look for recoil tabs,stick screwdriver in here. use channel locks to unscrew clutch.

nelly home owner, May 2008

Down in the center of the outer shell of the clutch is a Torx screw, T-25 if I remember correctly. Remove it and the clutch will easily come off. Before reassembly, put some light grease on the clutch shaft.

Larry McNeill, fixit@texoma.net, July 2007

link Click here to see other fixes for Ryobi 780r.

Fix Fault - Garden Tools

home label Garden Tools label_important Grass Trimmers

home Fix label Garden Tools label_important Grass Trimmers category Ryobi

How to Remove Clutch Rotor Assembly Ryobi 780r?

I can answer this question...

How to Remove Clutch Rotor Assembly Ryobi 780r?

I can answer this question ...

How to Remove Clutch Rotor Assembly Ryobi 780r?

spool head flies off?

Non-start on Flymo XLT 250?

flymo600hd lawn edger?

Is the screw in the picture for adjusting the idle?

Fuel Saber S25?

How do I fix my weed trimmer?

fuel?

Spear & jackson strimmer repair?