GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

How can i fix my Whirlpool AKZ146/WH FCEM6?

The appliance is fine other than, when i go to use the oven the fan works, but it doesn't heat. Can anyone advise a possible cause or repair?

Thanks
Steve, July 2007
AK's solution worked for me, just when I had given up trying to find a solution without paying for a mechanic. AK you are my new best friend! :-) Thanks heaps!

remove power and restore power right away (so unplug the socket and replug it straight away) and then immediately press the center button. If at first you dont succeed, try again! You then get to set the clock.

J.

Jay, September 2012
I had this same problem with my oven!...
this is what i did:
switched it off and then back on from the mains (do this really quickly do not wait between turning it off then back on), then quickly pressed the centre timer button. Did this 2-3 times untill the display showed the set-time screen.
Hope that helps....!
Cheers

AK - just had this problem with my oven too apparantly its a common fault with this type of oven ive just done what you said as mine was displaying STOP and nothing was working and mine sprang back to life allowing me to use it again !!! your a star !!!

Chris, March 2010
the oven had stop on display screen then went completely dead. removed cover and electrics seem okay but oven is now dead, apart from getting a handyman to repair any suggestions?

salty, October 2008
had power loss, got stop on screen will not turn on, check switch ok connected wires together still stop on display

richard watkins, May 2008
I had this same problem with my oven!...
this is what i did:
switched it off and then back on from the mains (do this really quickly do not wait between turning it off then back on), then quickly pressed the centre timer button. Did this 2-3 times untill the display showed the set-time screen.
Hope that helps....!
Cheers

AK, December 2007
link Click here to see other fixes for Whirlpool.