A Bra wire is trapped between the inner and outer drum, how do I remove it

Colin Thompson, July 2007

Literally just finished taking the fins off as per the last suggestion - it works !! Fins off, wire out, no messing - 5 minute job as described. Thank you !

Matt, March 2010

Hi Lads, had the same problem, Rougue Bra wire making a break for freedom. Just switch off the power, you can leave all the hoses attached. no need to remove any covers. I discovered that the three plastic fins (that make the clothes toss around) inside the drum click out when you pull them towards the front of the washing machine. Just push them down onto the drum and then slide it towards the front of the machine. When these are off you can rotate the drum until the wire shows itself through the large holes where the fins came off, then just get your pliers and pull it out. 5 minute job,

TC, May 2009

remove the lower sump hose then try to hook offending article out if you need a bigger access remove the heater element BUT remember to RESEAL the heater on re-assembly.

wirecutterman, February 2008