Joey, I assume you have the answer already, but this can be for other's in the future.. and this is from memory so it's in general not exact... Remove the Deck, Secure the back wheels so machine won't roll and elevate the front end about 18 inches, it help if you have a bumper on front, then you can just hand lift and set on something.. There's a couple of guards you'll have to remove around the pully's or just loosen enough to get belts around pully's, I think there's a brace on the front pully you'll have to remove, along with removing the bolt from the bottom of the steering shaft and pushing the steering shaft up so you can run it through the middle of belt... takes about an hour once you know what you doing, 1 1/2 - 2 hrs if your figuring it out as you go... It's do able.. Good Luck..
Ron, August 2008
