I have a Concept 6 Advanced Microprocessor control for my burglar alarm in my house, which has been there since it was built. Unfortunately the people who lived here before me don't seem to have left me the instruction manual. I would like to change the code from the one they used to one of my own but haven't a clue where to start. If anyone has any clue then please could you let me know....I don't want to upset the neighbours by setting the alarm off!!!!

Sarah Richens, July 2007

If for any reason it has lost the code you programmed, try 0123 as this should be the default.

dpf, November 2021

Hiya I have a concept advanced microprocessor power control and it does not work.only 2 lights show and that is day and power i tryed to do what pete said but it still doent work.Please can you help me.I am desprate to make it work.

Amelia, March 2012

It doesnt work for me so how do i do it ?? thanks tamper doesnt come on at all and 4 indicator buttons dont come on so can you please tell me

Babes, March 2012

Hey pete the exact same thin happened to me, can you send me a copy of this manual please

Craig Evans, March 2010

Hey pete the exact same thin happened to me, can you send me a copy of this manual please

Craig Evans, February 2010

Hey pete the exact same thin happened to me, can you send me a copy of this manual please

Craig Evans, February 2010

If you need a copy of the user manual I can supply.... leave your email here. in the meantime, here is how to change your code.

Pete, July 2007

Press Prog button.... all lights show
Enter your current code ..... day and tamper lights show
Press no.8 ........ 4 zone indicators show.
now enter your NEW code ( 4 digits)... bleeps twice and day & tamper lights show.
Press Reset ... returns to Day. and your new code is active.

Good luck.

Pete, July 2007