thanks Paul .

got two panic alarms , nothing happening with either of them when i press them .
im guessing the carpet fitter has moved/damaged a wire.. it went off a few times i reset straight away and then i thought i would leave it till they had finished to stop it going off all the time so i dont know if thats impacted on it .
Ive got a brother whose got a bit of elecrtical knowledge and i shall bribe him with a roast dinner tomorrow but it would be great if you could give me some idea of what to tell him to do. ( ps ive had the front off it and alarm didnt go off ).
thanks
vicky

vicky clarke, August 2007

It sounds like the cable has been damaged. The Alarm System will not indicate a Tamper when the lid is removed because a PA fault is still present and needs to be reset (the wire needs to be repaired and hence the circuit will be cleared and the system will reset).
1 Find the damaged cable and repair.
2 Ensure that the PA buttons have been reset, usually with a key.
3 Replace the control panel lid.
4 Press Reset
5 The system should give you a double beep and be ready to be used again.

Liam, August 2007