Jt asked ... Where to buy mt270x petrol cap?    |    Jo asked ... How to engage clutch on old sewing machine to engage needle?    |    Jacky asked ... Miele Vacuum cleaner?    |    Ben asked ... Toyota Yaris French or Japanese?    |    Andy asked ... How can I mend my MacAlistair 450w hedge trimmer?    |    Click here to ask your question

HOW TO FIX THIS PROBLEM?

myFISHER PAYKEL WASHER WILL NOT FILL WITH WATER THEN IT TURNS OFF. DO YOU THINK IT NEEDS NEW WATER VALVES,AND CONTROL BOARD? GWL10US
PETE, August 2007
No First pull the machine away from the wall,unplug the power cord,lean the machine up on the back wall so it is only on 2 of its feet.Look under the machine near the middle of the wash drum there is this little water pump with a fan blade on it,check to see if it turns if it doesnot the pump is stuck or bad.
make sure no water is in the machine unplug, Remove the pump,If water is in machine drain it by taking the clamp off the hose that is away from the electric motor so no water gets on the motor.The pump turns counterclockwise after you lift up on a little white clip.Clean up anything that is in the way of the pump,it cost about $80.00.

PETER, August 2007
link Click here to see other fixes for GWL10US.