my washer dryer wd 1085 is not filling with cold water the hot one seems to be ok, can someone help me please.
jane

jane, August 2007

had same problem pulled it to bits and blew through (you need the mains feed to it so the valve is open - so be careful) now seems ok

dean, November 2007

sounds like the inlet valve has failed unless the cold water is turned off..... might be a little more expensive as this has a double cold inlet vale being a washer dryer.
the only way is to test with a multimeter on the valve coil.... UNPLUG FROM THE MAINS if you carry out this test.

Regards
Mike

Mike, August 2007