GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

piaggio zip 50 problems judders plz helpppppppp?

hiya there
my piaggio zip 51 plate starts up on the button, however when you try to rev the bike it ill rev up but judder through the revs, as though the engine is maxin out then droppin revs and maxin out again, it will gather speed but the engine will continue juddering as it does so.
i've taken the carb off cleaned the jets, all the surrounding areas, all inlets, changed the rollers, varitaor, i've even changed the spark plug twice, i also took off the carb and sprayed carb cleaner directly into the engine , the engine started but was still juddering, there is no loss of power or any cutting out, could anyone help
plzzzzzzzzzzzzzzzzz
fozz, August 2007
Hi I got a zip an it won't start tried put petrol in the cylinder an it still won't start it kind of start but dies again got an new spark plug an sparks blue what next

Jacob, November 2012
hi
i have a 2001 piaggio zip 125cc. when im driving it judderz and will cut out when i try and accelerate, it seems like the engine is flooding. i havent modified it at all. the bike has a new correct model spark plug and air filter ive also cleaned the carb. also the varitor and i belive the clutch were replaced about 1500 miles ago. has been working fine then suddenly these issues. not a big fan of walking my bike home any advice would be great

matt, October 2012
hi there i have a piaggio zip 05 it starts but after about 5 mins it cuts out i have changed the jet as it has a 70 kit on it but still cuts out dose any1 no y ???

ben, October 2012
hi i have tried everything changed fuel tap changed cdi changed oil seal changed carb restricted airflow and put airflow up only things i havenyt tried are rollers and clutch shoes any helpppppppppp !?!?!?!?!

paige, September 2012
Piaggio Zip 50 4t will start on and off, will idle fine but will not rev at times then other times it will not rev as high as it should.

Kyle Greig, March 2012
hi there i also have a piaggio zip sp which is derestricted, but i cant give full throttle because the revs drop right down. my local mechanic said it might be because the carb needs cleaning but im not sure. any advice would be much appreciated. thanks, Dan.

Dan, March 2011
hi you should try and change your variator rollers as they may be very worn, i had the same problem, hope this helps :)

charlie, November 2010
Why does no one ever mention tuning? most of these problems are likely caused by the carb not being tuned correctly for whatever reason. and the delay from standstill is DEFINITELY tuning - too lean, richen it up.

Kyle, September 2010
its the carburettor. u need a new one but there not cheap £100+

zipstar, July 2010
Annoyed me quite a lot its derestricted 2 stroke was doing around 40mph on half throttle, usually does 50-55mph on full throttle, gradually went up to max but then it chokes itself :/ Now up my road Im working the centrifugal clutch like hell doing 10mph, downhill I can still get to fourty on half throttle, but whenever I take it to full throttle it sounds like a stalling car. When I release the throttle the engine is still running and I can go on half throttle but this is a major problem! Please help! Thank you, Josh

JoshG, July 2010
can some one pls help me i have a 2001 piaggio zip 2t and it starts up fine but every time i go out on it and pull away from the light the engine seems to die and then after a lil bit it seems to speed up agian pls help thanks

carl, March 2010
i have a piaggio zip 50 and am having problems with the drive. Scenario: Riding along at whatever speed and slow down (quickly or slowly) to a stop at traffic lights (for example). When pulling away the engine doesn’t rev and i have very little or no drive. This lasts for 3-5 seconds and then the engine sound changes and the scooter drives away as normal. When it gets going all is fine until i stop again and try to pull away. Uphill is worse than flat. Does anyone have any ideas why this is happening?

daniel-lovatt, January 2010
my zip 50 cut out and now wnt start has spark and fuel bt stil wnt go any clues

barny, December 2009
hi i have got a 05 zip nd it keeps cuttin out every 200yrds wat do u think it is?

antony, November 2009
if your zip is trying to cut out after half throttle then take your air box cover of and stick the air filter it the inside of the outter cover with a bit of tape. :) worked for me mine is 02 2stroke runs like a dream now

john, September 2009
hi my sons zip cut out and now wont start new plug blue spark think is getting fule what to do next ??please any gluess

bry, July 2009
If the zip 50 dies after about half throttle and you have tried all the usual things such as cleaning the carb etc, then take off the air cleaner and start the engine. Increase the revs to the point when the engine dies and spray easy start or petrolium spray direct into the carb intake. If the engine responds, the fault is a lack of crankcase compression and the cure is to change the crankshaft oil seals. It sounds an odd cure but, it relates to how a two stroke works. I hold my hands up. I did not solve this myself, I was told by a Piaggio technician either way it works and is relatively cheap to repair. Good luck

norman Heath, May 2009
my son has a 2001 zip 50 it starts up first time but when you go to rev it up it starts to cut out as if its sucking in too much air, if i restrict the air intake it seem to rev ok ?

john, April 2009
could be the clutch drum (the one next to variator) , strip it & check the shoes

rod, August 2007
link Click here to see other fixes for Piaggio Zip.