Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

how do I srtip my dyson cleaner?

Motor noisey, how do I get the outer plastic covers apart
Model DC 07
.
ianmuirhead@blueyonder.co.uk, September 2007
easier than it looks, remove all clip on parts handle, cylinder, hoses etc including brush and housing. all screws are torx type.
4 x torx head screws to remove on underneath of cleaner, you will need a long reach for one of the screws or use a small flat blade. simply pull apart, plenty of give in all plastics so are forgiving when being bent and don't snap easily.
new motors are easy enough, use a bit of fairy liquid or sinilar to help with rubber cover replacement onto new motor, line up notches and if it looks ok screw it al back together. note that power cord goes through correct hole to switch, a couple to choose from if you don't make a note. easy really

paul, September 2007
Hi.

This site has manuals which will show you how to do the repair. http://dysonmanuals.inc.io/

jack, September 2007
link Click here to see other fixes for Dyson.