andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

Brotony Combi SE, flashing 60 light?

According to the 'helpful' manual, it says the 'ionisation circuit board is faulty'

So, which ones that. We had a circuit board replaced about 12 months ago related to the air switch

This time it works great, then it starts flashing to 60 light and nothing happens, reset or turn the boiler off/on and everything is fine again

This could be 2 days or 2 hours before it happens again and you lose hot water/heating and the boiler won't self start until its reset or turned off/on again


Many Thanks
Bob Smith, October 2007
Turns out there is a water leak somewhere within the boiler, hopefully just a washer has gone or loose union

This is causing the water pressure to drop, so the boiler goes into safe mode as pressure is now to low


Until fixed, cure is simply to use filing loop to re-pressure system and reset or turn off/on boiler

bob smith, October 2007
link Click here to see other fixes for Brotony Combi SE.