I have an Accenta 8 system with LED keypad. The exit time is set to 30 seconds, and I wish to change it to 10 seconds. I know how to access the engineer program but but I'm not sure on the next step as I cannot locate my installation manual. Can anyone help?

Peter, November 2007

Thanks for the advice Kevin, exit time has now been reset to 10 seconds. Cheers.

Peter, November 2007

I hope this helps as I managed to do it last night,

Makesure that the alarm is in Day Mode with the day and power lights on.
Press the Prog button (All indicators show)
Enter the engineer code
Press 1 (Zone 1 and Zone 2 indicators show)
Press 0 then 1 (this is for 10secs, 0 then 2 for 20 etc..., once entered the alarm will return to the programming mode)
Now exit the engineer mode, this should have done it.

If this doesn't work here is a link to installation guide for your alarm http://www.guardianalarms.net/home_security_manuals/ADE/Accenta_8_Installation_Manual.pdf

Page 13 is the one you need.

Hope this helps

Kevin Ladhams, November 2007