My machine washes through the whole cycle but I am unable to operate on a cold wash mode.I live in the tropics and cannot to do all my washing on a hot cycle.

Susan Amy, April 2005

MY BRANDT WASHING MACHINE WILL NOT START AFTER I HAVE STARTED THE AUTOMATIC TIMING. I ONLY HAVE INSTRUCTIONS IN FRENCH. DOES ANYONE HAVE INSTRUCTIONS IN ENGLISH.

MARION, September 2006

hi there Amy if your not electrically minded and dont want to zap ya self, then for a temporary basis for cold wash only, try this:
swap over your water pipes hot - cold / cold -hot this way u will only have cold water entering in your machine replacing the hot water previously. but definately get it fixed, do what user "11" said to do and it does sound like the cold water valve is faulty or no power is supplying this part.

also just a silly thing to check before all of this, make sure your cold water tap is working and water is comming out the end of the cold water pipe use a bucket or wash basin for drainage, good luck:)

brad, April 2005

have you checked the cold water valve is working? first check that the filter where the pipe connects to the valve is not cloged up

11, April 2005