Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

whats the problem hotpoint aquarius condenser dryer?

it seems to be heating up you can see the elements at the back glowing red but there is never any water to empty and the clothes do not dry.
dave, November 2007
Is the drum rotating ?. It may be a broken or detached drive belt or the drive motor may have failed.

Sean, August 2011
F-05 Error Message part way through cycle

Margaret, January 2011
its working but not getting hot and drying the clothes. I've cleaned out the filter at the bottom, the fluff collector and ensured there is no water in the storage collector.

Samantha Paterson, March 2009
try cleaning out the condenser unit, flush it out with water completely then let dry before putting it back in the machine, mine had the same problem and this fixed it. remember to unplug it before pulling out the condenser unit. hope this helps

AQ, February 2009
check that filters arent clogged

Dave, November 2007
link Click here to see other fixes for Hotpoint.