when I put heater on, no heat only cold air blows through, even when the engine has reached it's working temperature. the hose to the thermostat housing is hot and the top one leading to the heater unit behind the bulkhead is also hot but the lower one is luke warm. I replaced the thermostat approx 1 year ago and have tested it out of the car with boiling water and it opens ok, all the controls seem to activate ok and the blower is working ok. any ideas?

david lee, November 2007

sounds like there is a blockage in heater system, maybe heater matrix is partially blocked, if you take both heater hoses off and flush out with hose pipe this may help,if not blocked it could be water pump at fault (have known impellor to corrode away on some vehicles)

k, November 2007