What`s wrong potterton puma 80?

System lock-outs, Low system pressure System over pressures, sometimes no water flow through heating system but through PRV. DHW ok, unless low pressure lock out. Dials will not control temps for ei ... more

done

zanussi washer/dryer model WS1665W with E!0 error not drying?

After setting to dryer nothing has happened for ten minutes then error E10 shows on the display. The washing cycle works, but I am not convinced that the water is getting heated, as the door window s ... more

done

traceing a heater relay on a vauxhall frontera?

my daughters frontera has no heating fan,have checked fuses , blower switch, ect but no indecation of where the relay is

done

how can I fix my sime friendly format 100e?

The heating seems to work ok but can go off intermittantly but the hot water goes cold for no reason & we have to relight the pilot or turn off the water & turn the heating on & off at the controller ... more

done

candy CIC60 tumble sryer?

I have noticed a few other people have the same problem as me. The tumble dryer, (candy CIC60) is working but not heating up. I wonder if there is a reset button on the machine. Can anyone tell if the ... more

done

How can I stop my Potterton 80e from losing water and pressure?

My 80e loses pressure as soon as the central heating is run, have fitted a new pressure rlief valve. Pressure goes higher than 2 bar when heating is running, I then get a lockout and have to isolate t ... more

done

How do I fix Tumble Dryer, Creda, 37642?

Got number wrong first time. I'm an electrically trained person but work with electronics really.My Tumble Dryer not heating. May be secondary fuse if I can locate ? Is there a circuit diagram anywher ... more

done

tumble dryer Creda T622CW not heating?

tumble dryer Creda T622CW not heating Please help The dryer functions correctly but will not heat! Many thanks!

done

My GE Spacemaker is not heating?

My GE Spacemaker is not heating food. The timer /carosuel/bulb all work fine. But it does not heat food. Also there is some burning smell that comes when I open the door after starting the microwave. ... more

done

Any Ideas on how to fix my whirlpool awm 321?

During the final rince/spin cycles the machine stops and the timer motor also stops. advancing the controller 1 click will set the machine off again but the problem repeats itself a few mins later. it ... more

done

problem with sime friendly format 80e?

boiler runs for about 15 to 20 mins o.k after it stops for a rest the boiler restarts for about 5seconds then swithces off again then re lights again for 5 seconds this will keep happenning on central ... more

done

How can I fix my heater VW Golf G Reg?

When the engine reaches running temperature the heater stops working. The Haynes manual is as usual worse than useless. The thermostat opens to allow water to pass through the radiator and closes anth ... more

done

how can I fix my Creda Condenser dryer Model No T632CW?

My condenser dryer has stopped blowing hot air, the fan is working but there is no heat, the fillaments at the back of the machine are not heating up?

done

how can i get rid of an air lock on a ford mondeo?

the heating system on my ford mondeo is blowing cold, but the water is circulating hot

done

potterton netaheat profile 80e not heating properly?

cetral heating not getting anywhere near up to temp without boiler switching off. changed room stat to no avail.hot water seems fine. can anyone help.

done

Metal in Microwave?

My cousin left a metal spoon submerjed in a bowl of food being microwaved and only realized it after she microwaved the food. Now the microwave isn't heating anything. It still runs the same as before ... more

done

Will someone post a wiring layout here for a White Knight Sensordry please?

There is a great need by many people for the correct wiring layout to their tumble driers. Most as a result of removing the back and accidentally pulling them off! If someone has a working drier wi ... more

done

vaillant VCW GB 242 EH?

My dad's VCW GB 242 EH was leaking at diaphram unit so we replaced it and also the divertor. However, the ignition keeps tripping and when hot water is run from the tap and we eventually get it ignite ... more

done

Some radiators hot, some are cold?

I have oil fired central heating and some of the radiators upstairs and downstairs are hot and some are cold, the pipe leading up to some are warm but the radiator is still cold. Hot water is also on ... more

done

What is the correct wiring layout for a White Knight Sensordry?

I recently fixed a loose drum but in doing so I accidentally pulled off some wires. It now doesnt heat in the main cycle but gets hot in the cool down cycle. I have (on the tag block) left to right: ... more

done