how do I fix the heating system for a 1998 ford Escort ZX2?

the heat is not blowing through my car for some reason and I was wondering what the check besides the fuse?

done

How do I fit new drive belt for Zanussi tumble dryer TC481W?

Tumble drier stopped tumbling although still heating. Took back off and drive belt was loose. Bought new one but not sure how to fit it - it seems to be as loose as the worn one. Any ideas? Is the ... more

done

What is wrong with my Hotpoint TDC32P?

Recently my TDC32P started stopping if tha's not a contradiction in terms, after a couple of minutes running. I looked at various forums and changed the heating element thermostats as recommended but ... more

done

Anti Backflow valve leaking?

HI! I replaced the antibackflow valve on my 9 year old heating plant because it was dripping from the valve, and the new one is doing exactly the same thing, it has dripped about a pint in the last 1 ... more

done

Rowenta does not heat?

Rowenta steam iron does not heat. Power cord is ok. I have the iron completely apart. I suspect the heating elements are bad? Can they be replaced? I could not find a termal fuse. Thank you, p ... more

done

tumble dryer not heating up need schematics?

Creda Crusader condenser tumble dryer Model CT6 1C not heating up. Element working. High/low heat switch continuity check ok. Motor working. Drum turns. Cleaned all filters etc... Suspect thermostat. ... more

done

Creda T622CW not heating - help?

Stopped heating 1 year and 1 day after purchase. Reading here there isn't a definite solution. I have checked the continuity of the heating elements all seems fine. How can I test the two thermostats ... more

done

How to replace element in White Knight tumble dryer?

I need to replace my heating element in my White Knight CL417WV. I am unsure what wires go where.. Please Help!!

done

my fan does not work?

my fan no longer works an i have to keep the heating on to cool the engine. I have checked the fuses and they seem ok have you got any advice on what to do?

done

HOW TOO FIX MY TV 630 HOOVER TUMBLE DRYER?

THE MACHINE IS DOING ALL ITS MEANT TOO BUT ITS NOT HEATING UP AND FILTER LIGHT IS ON ALL THE TIME.

done

who makes puma 80 combi boilers ?

I have a puma 80 combi boiler. I can light the pilot light but within between 5 and 30 minutes it goes out when the heating or hot water is used, can u help ?

done

How can I fix my dishwasher?

My Dishwasher is running it's full cycle but the soap dispenser is not opening and the machine is not heating the water. Are these two probelms related - I need to know what I'm looking at. Is i ... more

done

Creda T622CW?

Our Creda T622CW is not heating up, tried shorting both cutouts on back of dryer to find only top element out of 4 is heating up.Is this normal? One of the cutouts has a diaphragm that can only be des ... more

done

potterton puma 80?

I run my central heating and the boiler ignites for about 20 seconds then stops. it will not run again for a long time. but if I run the hot water the boiler ignites and runs ok until I turn the tap o ... more

done

how can i fix my vaillant turbomax boiler?

model 242E central heating working fine but when you switch on the hot tap the boiler does not fire up

done

Belling Electric Oven - over-heating?

The main oven on by Belling dual oven elec cooker appears to cook at max temperature only - all food is burned. Is it the thermostat? Its a bit pricey to change if that is not the problem!

done

help! the baby will need a bath!?

i have a sime friendly. the central heating works. the hot water doesnt. the pilot light is on but when i turn the hot tap on nothing happens. it has been like this since a friend fitted a new radiato ... more

done

central heating problem old baxi back boiler?

i have a baxi back boiler which is not working properly when i turn on the heating only the upstairs get hot the downstairs get lukewarm the system clicks on and off every 5mins or so and the hot wate ... more

done

DHW pressure dropping after tap turned on?

Boiler: Baxi Genesis 80. About 15-45 seconds after the hot tap is turned on the flow will slow to a trickle and i need to open the tap more to restore the flow. I may need to repeat this again to kee ... more

done

How do I take my Kenmore washer apart to get to heating element?

model # 63032101. Bought it in 2003. Cant figure how to take the back off. Do I go in from the front and how do I do that? It doesnt heat.

done