Fix Fault Zanussi

labellabel_off

check_circle Free repair help

We have 5480 questions about fixing 'zanussi'

slipping programme selecter knob Zanussi Mod C 80678 L?

The bar in the centre of the programme dial which allows a programme to be selected or changed no longer engages with the outer ring and I cannot change the washing programme. It feels as if a spline ... more


done

Zanussi WDJ 1074 Drum won't rotate?

Hi - my washing machine does everything - except go round. Checked brushes - OK. Checked module and found burn mark so replaced module - no difference. What's more likely, timer or motor burnout? - bo ... more


done

What could be the cause of my Zanussi washing machine jumping violently?

What could be the cause of my Zanussi washing machine jumping violently? This is an intermittent fault and does not seem to be caused by an uneven load. It usually occurs at the beginning of the cycle ... more


done

My Zanussi dishwasher is not cleaning very well?

The dishwasher has again started to not wash very well I have tried cleaning what I think are the level sensors this worked the last time as they were gunged up but not this time. The machine goes ... more


done

Stones fell out of Zanussi Washer Dryer?

I had the machine on and it started rocking violently and the noise was deafining! I stopped it anyway and turned the machine on it's side. These 5/6 rocks fell out that when put together form a ci ... more


done

Zanussi Jetsystem error e40?

Can’t find the manual anywhere but someone has told me that E40 is a pump/ Drain problem. Filter trap clear, pipe work and drain clear.!!! When you select any cycle the door locks and unlocks tw ... more


done

My Zanussi washer stains my clothes?

My Zanussi washer leaves a dark blue stain on my laundry especially T-shirts and towels. Only bleach clear the stain. What can I do?


done

my zanussi washing machine is not going into rinse or spin?

water loads when first turned on and washes but then stops no rinse or spin


done

I can hear water flowing into my Zanussi throughout cycle?

During the wash cycle my Zanussi Aquacycle 1050 continuously adds water to the machine. I can hear water entering the powder tray and can see a constant stream into the drain outside. Does anyone know ... more


done

I have a Zanussi which has an AL5 alarm - not filling?

I have a Zanussi which has an AL5 alarm - not filling. Can I fix this myself


done

Drum sticking after drive belt replacement on Zanussi TC-470?

Zanussi TC-470 I have recently changed the main drive belt on my Zanussi TC-470 tumble dryer, but now the drum sticks and it does not dry properly. I followed the advice given in various posts on th ... more


done

Zanussi FL 881 - can I tighten the drive belt?

With a full load of washing the drum does not rotate fully. I think the drive belt has stretched. Do I need to replace the belt or is there a tensioner that I can adjust the tension with? The wash ... more


done

Zanussi condenser tumble dryer leaking?

Everytime i run the tumble dryer there is a small amount of water I can see underneath it. Needless to say this is ruining my wood floors. What can be causing this or is it inherent in condensing drye ... more


done

Zanussi TD163 Tumble Drier Spin but not heat?

The drum spins but not heat i have changed the heater element but still the same i see a themo switch on the outlet i think this is ok is there any other one to check What is the best way to check ... more


done

Zanussi 1100 won't do anything!?

I've got a Zanussi 1100 washing machine. The program lights all appear as per normal and the door locks etc but it just sits there doing nothing??


done

Zanussi WDJ 1074 Drive motor not working - help!?

Hi Everything seems to work on the machine except the main drum motor. Could it be a switching problem or the motor brushes. (The motor is totally dead, would the brushes have worn out gradually ca ... more


done

Zanussi bearins replacement, black spots on washing?

Hi, could you please tell me in full how to replace the bearings on a Zanussi FJ1295 washing machine, black spots (grease or oil from bearings) seem to have appeared on our clothes, the holes match up ... more


done

Error Code E20 Zanussi Washer Dryer WJD1667?

What does Error code E20 mean on a Zunissi Washer Dryer model WJD1667? If I knew that I could try and fix it.


done

How do I fix a Zanussi door seal?

Zanussi Aquacycle 1000 Model FLA1001W


done

Replaceing the belt on a Zanussi TC 470?

The large drive belt snapped on my Zanussi TC 470, I have tried to replace it but the new one is much to slack. Dose anyone know if there should be some sort of tensioner that needs to be fitted. It j ... more


done