Identify problem on my kenwood major a717b?

I have an old kenwood that's suddenly developed a problem, english is not my first language so iv'e uploaded a video of the problem to youtube, maybe this will help? https://www.youtube.com/watch?v ... more

Where can I purchase a new lid for my hilarity processor?

The lid on my hinari lifestyle combi 650w processor has broke therefore I need just the lid where would I be able to purchase the lid only. And I need a new manual. The lip on the lid which twists in ... more

Coupling part for?

Can I get a new coupling part, for my Hinari, Lifestyle FPB2 food processor (combi 600w)

I cannot control my Magimix R1 on/off?

The small red pressure sensor has perished with age and the motor can only be controlled from the plug switch not the lid of the bowl. Is it possible to get it repaired?

A plastic bottle of molasses fell into myreamed mixture and the mixer starn?

A plastic bottle of molasses fell into my creamed mixture into the bowl whilst creaming The mixer started making a rattling sound and the beater stopped rotating How can l fix it ? If l switch it on t ... more

done

remove top cover?

How to remove top cover from Kenwood A901 mixer have removed 3 screws from rear for blender attatchment and two screws at front of mixer. Top is loose but cover will not come off -push forward an ... more

My food processor does not switch on?

I have a Delta Compact Food Processor ADFP9018, but it does not switch on, how can I identify the fault?

La Machine by Moulinex?

I have a La Machine 354. It does not operate when I depress the lid. The spring is working but it does not rotate the blade?

Moulinex 517 Blender processor?

The capacitor has blown,what should i purchace,cant see the res value on the cap which is connected between L and N

Switch cover?

Switch cover has broken on the pulse so purchased a new full on off pulse switch for magimix 5100 how do I remove old on off pulse switch ..many thanks

Kenwood KM210?

Notice grease is seeping from the top gear when I take the cover off. Does it need to be regressed or is this normal, machine is early edition and has been in storage for a few years. I am not a r ... more

Braun Food processor Serpentine belt #4243072. Where can I buy one?Pau?

Where can I buy or order a belt for my Braun food processor #4243074

done

how to access roter of Kenwood food processor FP 270?

Not able to remove motor and gear assembly

Has any one got a wiring circuit diagram for kenwood chef model A901?

has any one got a wiring circuit diagram for kenwood chef model A901?

done

How can I fix my magimix?

I recently discovered aquafaba and my cake mix turned to bread dough and my engine cut out. Can i get my machine repaired or is it a gonna?

done

Getting the back piece off of FoodSaver FM-2100?

I am trying to clean the suck hose on my FoodSaver vacuum sealer. To do that I need to get in to the bottom of the machine. I can get an edge but back won't pry off. I'm afraid I am going to break the ... more

done

Philips hR7775/00 not powered on?

I bought discontinued model of Philips HR7775/00. At its second use theres some sparking/cracking sound came from power plug and machine not powered on. I want to repair it myself bacause philips and ... more

done

magimax food processor - spindle is stuck, ?

Magimix spindle is stuck, tried to pull it out with pliers and sprayed WD40 but nothing works. please help.

done

Hinari combi 650W processor FPB3 bowl has stopped working?

The blender part of the combi works fine. Also the bowl is properly aligned. Could it be the belt? All suggestions appreciated, thanks.

done

Kenwood KM 200 mixer how to remove the plastic cover?

I want to give our Kenwood KM 200 mixer a good clean. After removing the outlet covers and the three screws it should just lift off. Ours will not pass the slow speed or juice extractor casing?? Any ... more