The drum turns, everything appears to be working but no heat is produced

Bill Garner, May 2005

We had this. It just involved giving the condensing unit a good clean out. Its located at the bottom front of the drier. We found when this was blocked we didn't get any water coming through to the water collecter thing.

Bryan, February 2006

You may have a stuck floatswitch my friend.
remove power.
Remove the r/h side panel to reveal the motor.
Just behind the motor there is a beige box with a microswitch attatched.
Give this switch some exercise(switch it!) and it'll be fine.
if you move the drum round you'll find you can get your hand in easier.
avoid this problem by emptying water on every use.

Checy continuity of thermostats located behind the rear heater cover. If they are o/c. Replace.

Hotpoint man, May 2005

could be the thermal cut outs or the element you will need a meter to tes them but pull the plug first

aa, May 2005