GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

3 Bleeps on aeg dishwasher favorit 44050 vI?

We have three bleeps on our dishwasher, caused by the filtewr being blocked, this is now clear however i can't reset the leak prevention system, have tried unplugging from mains and still not reset

Please advise
Tim Parkinson, December 2007
cleared water from float would not reset. only reset when i held all four programme buttons down for 20 secs then it reset immeadiately

maurice, January 2009
I'm absolutely hopeless at anything like this, I tried the switch off for 24 hours; I tried the turn on, hear the beeps switch off at the mains power then turn off the water, switch back on the power etc ... none worked.
But pulling out the dishwasher and tipping it - now that worked like a dream.
Don't forget that the machine is likely to have water still in it.

Rob, September 2008
tried the switching off water and power wait 24 hours and switch on again but did not work for me.

Plan B tipping it on its side (towels in place) and letting it drain seems to be working.

Dave, June 2008
Worked for me by turning off power with door closed. However not sure if my pump is 'us' as was running all night!!

Jimbo, June 2008
Tried Martines tip which did not work initially so we tried pulling out the machine and tilting it backwards. I seem to remember reading somewhere that this would reset the float level which activates the leak prevention system in the first place. We then tried Martines system again and the machine worked.

Joe Millane, April 2008
Tim,
I suggest you turn both the water and the electrical mains supply and leave for 24 hrs at least, then try again by just switching on the electricity. If no bleeps turn off electrical power then turn on water and try starting the machine again. See my previous comment from Dec.

Colin Skipton, January 2008
I followed Martine's plumbers suggestion, however the triple bleep did not go away. So I left the power and water both off overnight and hey presto the machine fired up the next morning. (The online machine manual explains how the anti flood device is set off but not how to get back to status quo). I'd be interested to know whether this method works for other 3 bleepers - Thank you Martine and your plumber

Colin Skipton, December 2007
to all those suffering from the three bleeps problem.. mine is now fixed which is a complete mystery to me. This is what i did.
turned on the programme, it bleeped, i turned it off at the mains, i left it for 24 hours, i turned it on at the mains and when i did that it started filling and working normally. I think the key, apart from leaving it for 24 hours, was not opening the door ( ours has controls inside ) after i had turned it on at the mains .

kate amis, December 2007
Thanks for your suggestions- no luck for me but now I am worried i don't know which way is on or off for the tap cos I have fiddled with it so many times. Have resorted to booking an AEg engineer but he can't come till 27th Dec. When I suggested to my youngest son that he helped me with the washing up this am he replied ' but we did the washing up yesterday!! ' any more ideas v welcome..........for the dishwasher rather than the child!

kate amis, December 2007
I have just spoken to a plumber friend of mine and he advised me to switch off the dishwasher at the mains, then switch off the tap leading to the dishwasher. Wait a few seconds and then switch back on at mains and start program to see if it beeps. If doesn't beep, turn off at switch on dishwasher and then turn on water tap and restart program as normal and wait. If no beeps then you may be in luck and you should then hear water going in. Hope this helps. I can't guarantee it's a permanent solution!

Martine Hastings, December 2007
Another victim of the three bleep mystery here. If anyone has any tips they would be greatly appreciated. Same make, same model etc

Mark Hastings, December 2007
I'm having the exact same problem - same model, same error - can't seem to find a solution for a reset anywhere?!

Any help MASSIVELY appreciated...

Tarquin, December 2007
Tim, did you ever get any answer to this problem- mine is doing the same thing and we cannot sort it out. We have a house full of people over christmas and was rather relying on my usually trustworthy dishwasher.
Kate

kate amis, December 2007
link Click here to see other fixes for AEG.