GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Hotpoint fault code F-05 what is wrong and how do I fix it?

I have a Hotpoint WF865 and it has just stopped working with a full load of water and dirty clothes in it. It gives me a fault code of F-05. What does this mean and can I fix it myself as its out of warranty plus is Christmas in 2 days!!!!

Help please

Mike
Mike Young, December 2007
I have an Hotpoint Ultima WF840. It also had F-05 on it. We took off the back panel and disconnected the hose (plastic clip was a pain but came off after about 10 mins of waggling it). Took out the pump, cleared it and some debris was in pump and filter under drum (including toe end of a pair of tights, a bra wire in pieces, the fastening section off a bra and some curtain hooks, only gutted there was no money ha ha). Turned the blades inside pump which still clicked but put together again and set away. Drained ok this time but still made buzzing and clicking sounds.
So we had to replace the pump (we were lucky, next door's hotpoint had busted electrics and they'd bought new rather than fix so we used their pump as was in perfect working order, but they are cheap enough from an independant retailer and very easy to replace).
Its now all working perfectly, and just as silent as it was on first purchase.
After all the panics about paying for repair or taking apart, it was very eays and all my washing done again.
Hope this helps anyone who needs it!

Suzie, December 2007
Hi, Try checking to see if the filter is blocked.To do this you will have to get the water out first by lowering the grey hose to a bucket on the floor.There is an access panel on the back of the washer, the filter is contained inside the large black rubber hose. There is usually a large metal band with a screw in it that holds the filter housing to the drum.

Erixc, December 2007
link Click here to see other fixes for Hotpoint.