I have just changed my monitor to a TFT from a CRT. I have set it up correctly and am using the specific Driver. The picture geometry is slightly wrong. The picture is stretched slightly too tall. I have painted an exact circle in MS Paint and measured it with a ruler against the screen. The circle is quite a bit taller than it is wide.

What adjustment can I make to shrink the height of the picture on my monitor?

Bill, May 2005

This sounds as though you are not using the screen's native resolution. LCDs are basically designed to work with one particular screen resolution. You should check that you are using the correct resolution for the screen.

If you have changed from a CRT to an LCD you will probably find that you need to increase the resolution that you use.

(Note to people about to buy an LCD screen. Check that your PC's graphics card can display the resolution that the LCD is designed to display before you buy one, otherwise you may find that you need to upgrade your graphics card.)

TS, June 2005