3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

What fuse do I need for my ED8525S-SBD microwave?

My DeLonghi microwave suddenly stopped working totally. I opened it up and found a small white fuse at the main incoming power point. The markings on the fuse appear to say T8A 250V. I took this to my local electrical shop and they weren't sure what to give me as replacement. They gave me a 500Mah fuse of the same physical size. I fitted this and the digital display came on which suggests that the old fuse had gone. However, as soon as I tried to start the microwave oven everything went off again - presumably blowing the new fuse. Question is - what fuse do I need to ask for at the shop and is it likely that this is the source of my problem?
Steve Fricker, January 2008
The fuse is blowing because there is a problem with the HV circuits. You need a microwave engineer

Richard Whiteman MIcrowavehelp, May 2008
It's an 8 amp, 250 volt fuse. That's what the 8A 250V means. Obviously, the 1/2 Amp (not amp hour as you said) fuse they gave you can't power a microwave, so it blows.

Michael, February 2008
Search this website, its has the anwer for more details. The fuse is on this website:
http://www.awimicrowaves.com/product_info.php?cPath=3_47&products_id=557&osCsid=9806da93895fe35bf515a74549a15c30

Jiten Karia, January 2008
link Click here to see other fixes for DeLonghi ED8525S-SBD.